About Us  |  Contact Us |  Customer Service  | Secure Shopping  |   Register or Log in  |  Shopping Cart ( 0 ) Item(s)
We are here to help 9am - 17pm Mon - Fri
Customer Service 07477 550 230 24/7 Technical Support 07477 550 230
Home » Gamebird, Quail & Poultry Rearing Supplies » Automatic Drinkers » Large Automatic Cup Drinker with Nipple
Item Code: NPA- 03-L

Large Automatic Cup Drinker with Nipple

| 0 Reviews | Write a review
£3.99
( Exclude VAT )
 In Stock
Large Automatic Cup Drinker with Nipple  £3.99
Quantity:
Share this product

The Large Cup Drinker is a full automatic drinker designed by Crescentquail to use old water tanks, buckets, feed and any other type of container turning them into reservoirs for your birds drinking water.

Pay less than the market price for your drinkers by converting your of 5lt / 10lt / 20lt / 30lt / 50lt / 100lt or more automatic drinkers into a water depot with the one you have.

The flat surface is drilled into any tank.

Their are no springs attached, it works with the force of water lifting the drinker, so it does not break down. It is easy to fit, maintain and use.

Thanks to its buoyant structure, water is always automatically ready in the cup.

Ideal for outside or indoor use, the Large Cup Drinker is hardwearing and suitable for All poultry and game and wild birds.

Important note
As all other watering systems, in extreme weather conditions frost can cause intolerance.

As seen in the photo, in this watering system used the only metal is the nipple but all other components are made of plastic mould and is cold weather resistant, will not crack in the cold.

Fitting
Simply drill the water container with a 12mm (1/2”) drill at a suitable height for your birds.

Fit the Large Cup Drinker by removing the filter nut, place the Large Cup Drinker spigot through the hole leaving the washer on the outside and tighten down the nut until it forms a seal with the wall of the tank.

Fill with water, check angle and retighten if necessary.
There are no instructions for this product.

Send an Enquiry

If you cannot find answers to your questions on our product page, it is sufficient to contact us. We will inform you as soon as possible.

We will try to reply to you within 24 working hours.

Customer Reviews

☆ ☆ ☆ ☆ ☆

Be the first to write a review

Write a review
NP SERIES
Automatic Drinkers     
NPA- 03-L
www.crescentquail.co.uk
sales@crescentquail.co.uk 24/7 Call for advice07477 550 230
The Large Cup Drinker is a full automatic drinker designed by Crescentquail to use old water tanks, buckets, feed and any other type of container turning them into reservoirs for your birds drinking water.

Pay less than the market price for your drinkers by converting your of 5lt / 10lt / 20lt / 30lt / 50lt / 100lt or more automatic drinkers into a water depot with the one you have.

The flat surface is drilled into any tank.

Their are no springs attached, it works with the force of water lifting the drinker, so it does not break down. It is easy to fit, maintain and use.

Thanks to its buoyant structure, water is always automatically ready in the cup.

Ideal for outside or indoor use, the Large Cup Drinker is hardwearing and suitable for All poultry and game and wild birds.

Important note
As all other watering systems, in extreme weather conditions frost can cause intolerance.

As seen in the photo, in this watering system used the only metal is the nipple but all other components are made of plastic mould and is cold weather resistant, will not crack in the cold.

Fitting
Simply drill the water container with a 12mm (1/2”) drill at a suitable height for your birds.

Fit the Large Cup Drinker by removing the filter nut, place the Large Cup Drinker spigot through the hole leaving the washer on the outside and tighten down the nut until it forms a seal with the wall of the tank.

Fill with water, check angle and retighten if necessary.